MRA9008  
  To make use of the whole features in this section you should log in first
Instructions Features Datasheet Accessories Services   Back     

Description

The low noise receiving unit MRA9008 is used in GSM base station. It provides high gain and low intermodulation level. DC power supply and control signals are sent through the RF cable using a bias tee.
The unit is suitable for outdoor tower mounting to improve uplink diversity performance. The monitoring board built-in enables RF signal by-pass in case of amplifier failure.


Frequency range : 824-960 MHz
Frequency band : 824-849 / 870-876 / 880-915 MHz
Bandwidth : 6 to 35 MHz
Gain : 17 dB
Gain ripple : 1 dB
Noise figure : < 1.9 dB
VSWR : < 1.3
Impedance : 50 Ohms
Outband attenuation : > 20 dB at 4 MHz
Output third order intercept point : > 27 dBm (*)
Output compression point at -1 dB : 23 dBm
Breakdown input power : 34 dBm
Ports : 2 (**)
Ingress protection : CEI 529 - IP67 (***)
Electromagnetic protection : NF C 9820
Corrosion protection : CEI68-2-52 - GPE
Color : Beige
Operating Temperature Range : -20 to +65°C
Relative humidity : 100%
Power supply : 10.8-14.6 V DC
Power consumption : < 6.5 W
Lightning protection : 30 KA
Dual amplifier with monitoring board
MTBF : 120000 hours
Connectors : 7/16 DIN female
Dimensions : 350 x 265 x110 mm
Weight : 5.5 Kg

(*) For 6 dBm two-tone 200 KHz spaced at antenna port
(**) For T/R duplexer built-in refer to the model MRA9008D
(***) IP55 for indoor equipment


Typical Characteristics


Mechanicals / Packaging

Copyright MCR TELECOMMUNICATION ®  
  Back